Hot sale good performance high glossy blue spray powder coating

Quick Details
Product Code:
Place of Origin:
Support Express · Sea freight · Land freight
Supply Ability:
500 piece per day
Quick Details
  • Certificate
  • Color
    According to the client's requirement
  • Application
    Outdoor and indoor
  • Surface
    Smooth and texture
  • Storage
  • Curing condition
  • Test
Shipping fee
Shipping fee
Inquiry Basket
Contact Supplier

photobank (15).jpg

















photobank (16).jpg









photobank (17).jpg












photobank (18).jpg


photobank (19).jpg

























Product Detail
Epoxy and Polyester Powder Coating
RAL and PANTONE or customized
Surface Finish
smooth/sandy/wrinkle/metallic/chrome/wood/hammer /glitter and customized
Glossy Level
High glossy/semi glossy/matt
5~6 square meters per kg at 40~90μm film thickness
Film Thickness
Specific Gravity
1.2~1.9 per CBM
Construction aluminium profile, advertisement board, outdoor lamps,
highway guardrail, road fence, outdoor metal furnitures, lamp pile,
crust of air conditioner, agricultural equipment or can be used on the surface
coatingof other metal work that require good performance in the environment
of high-intensity ultraviolet ray.




customized blue high glossy spray powder coating OEM,manufacturer,exporter,factory


Powder coating is a new type of solvent-free 100% solid powder coating. It has the characteristics of no solvent, no pollution, energy and resource saving, reduced labor intensity and high mechanical strength of the coating film.


According to the properties of film-forming substances, it is divided into: thermoplastic powder coatings (PE) and thermosetting powder coatings.


According to the appearance of the film-forming substance: it is divided into matte type, high-gloss type, art type, etc.


What is blue high glossy spray powder coating?


Blue high glossy spray powder coating is a new, solvent-free, 100% solid powder coating. It has advanced features such as solvent-free, pollution-free, energy and resource saving, labor intensity reduction and mechanical strength of coating film.


Application of blue high glossy spray powder coating


  • In order to give full play to the special functions of powder coating and extend the service life of the coating film, the surface of the coated object must be treated strictly before the surface. When spraying, the coated object must be thoroughly grounded to increase the spray power of powder coating.


  • Technology research, production process, coating equipment, construction and application of blue high glossy spray powder coating have achieved breakthrough development. The position of blue high gloss powder coatings in the coatings industry is becoming more and more important. At present, not only the output value has increased substantially, but also the variety is also increasing. Nowadays, epoxy-polyester hybrid high-gloss powder coatings have occupied a leading position. For example, polyester TG1G high-gloss powder coatings and polyurethane high-gloss powder coatings are now available in China. Many polyurethane high-gloss powder coatings have been put into production.


  • This formula is polyester TG1G high-gloss powder coating film with good weather resistance and is suitable for the coating of outdoor products; adding Lysi conventional additives (H98, 701B, 401), the film is not easy to yellow when baking and curing; The coating film is not easy to produce shrinkage, pinholes and other defects.


Common problems and solutions in the production of blue high light powder coating:


Insufficient gloss of coating film


  • The baking time is too long during curing;
  • The temperature is too high;
  • There are other harmful gases mixed in the baking;
  • The surface of the workpiece is too rough;
  • The former method is not selected;


Discoloration of the coating film


  • Bake several times;
  • There are other gases mixed in the oven;
  • Excessive baking during curing;


Orange peel on coating surface


  • The thickness of the sprayed coating is uneven;
  • The degree of powder atomization is not good, and the spray gun has powder accumulation.
  • The curing temperature is too low;
  • The powder is damp, and the powder particles are too coarse
  • The workpiece is poorly grounded;
  • The baking temperature is too high;
  • The coating film is too thin;


Pores in the coating film


  • Improper surface treatment of the workpiece, and dirty degreasing;
  • The air source is contaminated, the compressed air is degreasing, and the dewatering is incomplete;
  • The surface of the workpiece is uneven;
  • Contaminated by dust or other impurities;


Bubbles in the coating film


  • After the surface treatment of the workpiece, the moisture is not completely dried, leaving pre-treatment residual liquid;
  • Degreasing, incomplete rust removal;
  • The bottom volatiles have not been cleaned;
  • There are pores on the surface of the workpiece;
  • The powder coating is too thick;


Uneven coating film


  • The powder spray is uneven;
  • The distance between the spray gun and the workpiece is too close;
  • High-voltage output is unstable.


Poor coating impact strength and adhesion


  • The phosphating film is too thick;
  • The curing temperature is too low and the time is too short, so that the curing is incomplete;
  • The bottom metal is not cleaned
  • The adhesion of the coated workpiece will be reduced after being immersed in water;


Pinholes in the coating


  • The air contains foreign matter and residual oil;
  • The spray gun voltage is too high, causing the coating to break down;
  • The distance between the spray gun and the workpiece is too close, causing coating breakdown;
  • The coating is too thin;
  • The coating film is not sufficiently cured;


A small amount of sand on the surface of the coating


  • The spray is blocked or the air flow is not smooth;
  • Poor atomization of the spray gun;
  • There is powder dripping in the powder spraying room; there are other debris contaminating the surface of the workpiece.


Coating peeling off


  • The surface treatment of the workpiece is not good, and the oil removal and rust removal are not thorough;
  • The output voltage of the high-voltage electrostatic generator is insufficient
  • The workpiece is poorly grounded;
  • The air pressure is too high when spraying powder;


Uneven powder supply


  • The powder supply pipe or the powder spray pipe is blocked, and the powder adheres and hardens at the nozzle;
  • Insufficient air pressure and unstable pressure;
  • The air compressor is mixed with oil or water;
  • The fluidization of the powder feeder is unstable, and the powder feeder is too small;
  • The powder supply tube is too long, and the resistance increases when the powder flows;






photobank (20).jpg


   photobank (21).jpg

photobank (22).jpg

Foshan Wolong Chemical Plant Co., Ltd. is a large-scale specialized powder coatings
manufacturer in China. Our company covers more than 20,000 square meters of area .

We are in possession of 10 large-scale plastic powder production lines introduced from
home and abroad. with annual output up to 5000 tons.
photobank (23).jpg
photobank (24).jpg
photobank (26).jpg
Our Services
We manufacture epoxy polyester powder coating, polyester TGIC powder coating, polyester
TGIC -FREE powder coating, polyurethane powder coating ,which are used to metal surface

Surface finish: smooth high gloss, smooth semi matt, smooth matt, wrinkle, emboss,
hammertone, sand vein, artistic and so on.

Just tell us your specification,we can provide you with products with best OEM service.
photobank (27).jpg
Net Weight
Gross Weight
Inner packing:polyethylene bag Outer packing:paper carton
Delivery time
3-15 days after deposit
30% deposit in advance,70% balance before shipment


1-Question: Are you Trade Company?
A:NO , We have our own factory . Brand “ Wintoly”
2-Question:Is Powder Coating safe for consumers such as children?

A:Yes. Powder coating is used on children's toys and furniture sold every day. It has the distinction

of being one of the most environmentally and consumer friendly products on the market today.

3-Question: What colours are available to me?
A:We usually carry a very large range of colours, including the standard Colorbond range.
Has access to over 300 paint colors and textures. Feel free to call us and ask if we stock your
required colour.
If you already have a color in mind, bring it in so that we can match it as closely as we can
without sacrificing quality.
4-Question:What type of powder coating should I choose? 
A:Powder coatings are available in three basic types, each offering different performance
attributes. Epoxy for the best corrosion protection. Hybrid(s) typically offer the best chemical
and solvent resistance. Polyester for the highest exterior stability and performance.
5-Question: What Can Be Powder Coated?
A: Typically any metal object that can hold the electrostatic charge needed to affix the
sprayed powder and can tolerate the high heat levels of the curing process. Mild steel,
galvanized and electroplated steel, aluminum, stainless steel and most other steel alloys
can be powder coated.
6-Question: Are all the colors the same price? 
A:No. Some colors are more expensive due to their availability, ingredients. such as
textured powders, sand, metallics, or glow in the dark powders.
7-Question: Where can I find pricing information? 
A;Our pricing structure is dependant on volume, technology and color choice .
Please contact us for specific product pricing.


Question & Answer